Failed paver sealer in Bonita Springs? HD Paver Sealing & Pressure Washing strips it down to bare paver and reseals the right way. Free estimate. 2-year warranty on completed work.
Paver Stripping & Restoration in Bonita Springs, FL: we strip every layer of failed, peeling, or cloudy sealer back to bare paver, then reseal so the new coat bonds to clean stone instead of old product. We work across Bonita Springs, from Bonita Bay to Palmira. Call (941) 237-8107 for a free estimate.
Bonita Springs sits right on the Lee and Collier county line with the Gulf a short run to the west, and it carries a genuine salt gradient across the city. Properties near Bonita Beach Road and out toward the water take steady salt-air exposure, while the communities further inland along Bonita Grande and Imperial trade that for lake and preserve humidity instead. The wet season hits everything the same way. Heavy afternoon storms from June into September, high humidity between them, and hard UV whenever the sky clears. That combination stresses sealer from three directions at once, and the Imperial River and the estuary system running through the city keep moisture in the air well after the rain stops. Unsealed pavers here fade on the sunny side and grow on the shaded side.
Bonita Bay, Palmira, and Pelican Landing are affluent gated communities with heavy use of travertine pool decks and premium concrete pavers on driveways and motor courts, and the quality of the original installations is generally high. That matters, because a well-installed paver system on a proper base is worth maintaining rather than replacing. Travertine here needs pH-neutral cleaning and a penetrating stone sealer. The large-format concrete pavers common in these motor courts show every inconsistency in an application, so they get sealed carefully and evenly rather than quickly. Palmira holds a concentration of newer installations from the 2010s that are approaching a first major reseal, while parts of Bonita Bay and Pelican Landing are older and more likely to need stripping where a previous coat has clouded or started peeling.
We serve Bonita Bay, Palmira Golf and Country Club, Pelican Landing, Imperial Bonita Estates, and the communities along the Bonita Beach Road corridor across the 34134 and 34135 ZIP codes. Nearly all of that is HOA governed and several of these communities run architectural review on exterior finishes, so we match the finish already approved and common on your street rather than introducing something that stands out. We are familiar with how the gated communities here handle vendor access, and we work to whatever notice and scheduling the community office needs. Palmira is a regular stop on our route and we frequently work several homes in a neighborhood on the same trip, which is worth knowing if your neighbors are talking about their driveways.
Looking for paver stripping & restoration near me in Bonita Springs? We work throughout Bonita Bay, Palmira, Pelican Landing, and all surrounding Bonita Springs communities.
Enough to change the schedule. Properties toward the Gulf end of Bonita Beach Road take a meaningfully heavier salt load than the communities several miles inland, and salt is the exposure that shortens sealer life fastest. It sits on the film, abrades under traffic, and holds humidity against the joints so they never dry properly.
Inland Bonita Springs trades that for a different problem. Lakes, preserves, and the estuary corridors keep humidity high, and the mature landscaping in the established gated communities creates real shade. Shaded, damp pavers grow algae and mildew rather than fading, so the failure looks completely different even though the underlying cause is the same moisture.
In practice that means we quote roughly two years on the coastal side and two to three inland, with covered lanais running longer than either. It also means one property can genuinely need its pool deck done a year before its driveway. That is not a sales tactic. It is two different exposures on one address.
Large-format pavers and travertine motor courts are unforgiving surfaces to seal. They are big, they are visible from the street, and their scale means any inconsistency in the application shows up as a visible band or blotch rather than disappearing into the texture the way it might on a small brick driveway.
That comes down to technique and to product control. Even coverage, consistent wet-edge work, and the right number of coats applied at the right intervals. Inseco Sealthane goes on in three coats on concrete paver work for exactly this reason. Coat count is not upselling. It is what produces a film that cures evenly and holds color rather than thinning out in the high-traffic lanes within a year.
On travertine the priority shifts. There we are using an impregnating stone sealer that penetrates rather than films, and the risk is not banding but etching from the wrong cleaning chemistry beforehand. pH-neutral products only, and no acid at any point. Etched travertine does not come back, and on a motor court of that size the mistake is expensive.
Coordination first. Communities like Bonita Bay, Palmira, and Pelican Landing have their own vendor access procedures, gate notice requirements, and working hours, and we work to whatever the community office asks rather than turning up and hoping. If your association wants product information or a certificate before work starts, we will get you what you need to hand over.
Consistency second. Where a community runs architectural standards, the safest answer is the finish already approved and visible on your street. The usual choice is wet-look gloss versus matte. Both protect identically and the difference is purely how it looks, so the deciding factor is normally what your neighbors already have.
Then cure time, which people underestimate. Twenty-four hours before foot traffic, forty-eight to seventy-two before vehicles, and about a week to full cure. In a community with shared driveways, guest parking rules, or a tight motor court, that window needs planning before the day rather than on it. Tell us your constraints and we will schedule around them.
Here's exactly what happens when HD Paver Sealing & Pressure Washing comes to your Bonita Springs property.
A commercial-grade chemical stripper is applied across the entire surface and allowed to fully dwell until the existing sealer is dissolved and ready to release from the paver.
High-pressure washing removes all dissolved sealer residue and chemical stripper, leaving bare paver material fully exposed and free of contamination.
With the surface stripped clean, we treat any efflorescence or mineral deposits that were hidden under the old sealer. These must be addressed before new sealer goes on.
The stripped surface goes directly into our complete sealing workflow: chemical treatment, secondary prep, drying, and three-coat Inseco Sealthane application. Stripping is always paired with resealing. We never leave bare pavers exposed.
If your sealer is turning white, peeling, flaking, or trapping moisture, all common signs in Bonita Springs's heat and humidity, it's time to strip. Resealing over failing sealer just locks the problem in and the new coat fails just as fast.
Only if the existing sealer is fully intact. Once sealer starts peeling or clouding in Bonita Springs's climate, applying a new coat over it will produce the same failure within a season. Stripping is the only way to start clean.
Most residential stripping jobs take one to two days. Because stripping is always followed by our full sealing process, plan for 3 to 4 days total for a strip-and-reseal project.
No. Our chemical strippers are formulated to dissolve sealer without attacking the paver material itself. High-GPM cleaning removes the dissolved residue without surface damage.
After stripping we move directly into our full sealing process, chemical treatment, efflorescence treatment where needed, drying, and three coats of Inseco Sealthane. You get a complete restoration, not just a stripped surface.
Yes. Bonita Bay and Pelican Landing are two of our most active gated communities in Bonita Springs. Both have premium travertine and concrete paver installations on driveways, motor courts, and pool decks that benefit from regular maintenance sealing. We are familiar with the HOA guidelines in both communities.
Yes. Palmira is a regular part of our Bonita Springs route. The community has a high concentration of newer concrete and travertine paver installations, many motor courts, pool decks, and driveways from the 2010s that are approaching their first major reseal. We work in Palmira frequently.
We'll come to your property, assess the surface, and give you a straight quote before any work begins.
Thanks, we'll be in touch shortly. Need it sooner? Call us at (941) 237-8107.
