Failed paver sealer in Sarasota? HD Paver Sealing & Pressure Washing strips it down to bare paver and reseals the right way. Free estimate. 2-year warranty on completed work.
Sarasota's combination of Gulf humidity, intense UV, and summer afternoon storms accelerates sealer breakdown on driveways and pool decks more than almost anywhere in Florida.
Sarasota homes commonly feature travertine pool decks, brick-paver driveways, and concrete paver walkways — each requiring a different sealing approach.
We serve Siesta Key, Palmer Ranch, and Lakewood Ranch, including the high-density condominium corridors along US-41 and the Tamiami Trail.
Looking for paver stripping & restoration near me in Sarasota? HD Surface Solutions serves your neighborhood directly — from Siesta Key to Lakewood Ranch, with same-week scheduling available.
Here's exactly what happens when HD Paver Sealing & Pressure Washing comes to your Sarasota property.
A commercial-grade chemical stripper is applied across the entire surface and allowed to fully dwell until the existing sealer is dissolved and ready to release from the paver.
High-pressure washing removes all dissolved sealer residue and chemical stripper, leaving bare paver material fully exposed and free of contamination.
With the surface stripped clean, we treat any efflorescence or mineral deposits that were hidden under the old sealer. These must be addressed before new sealer goes on.
The stripped surface goes directly into our complete sealing workflow: chemical treatment, secondary prep, drying, and three-coat Inseco Sealthane application. Stripping is always paired with resealing — we never leave bare pavers exposed.
If your sealer is turning white, peeling, flaking, or trapping moisture — all common signs in Sarasota's heat and humidity — it's time to strip. Resealing over failing sealer just locks the problem in and the new coat fails just as fast.
Only if the existing sealer is fully intact. Once sealer starts peeling or clouding in Sarasota's climate, applying a new coat over it will produce the same failure within a season. Stripping is the only way to start clean.
Most residential stripping jobs take one to two days. Because stripping is always followed by our full sealing process, plan for 3–4 days total for a strip-and-reseal project.
No. Our chemical strippers are formulated to dissolve sealer without attacking the paver material itself. High-GPM cleaning removes the dissolved residue without surface damage.
After stripping we move directly into our full sealing process — chemical treatment, efflorescence treatment where needed, drying, and three coats of Inseco Sealthane. You get a complete restoration, not just a stripped surface.
Yes — travertine sealing is one of our most requested jobs in Sarasota. We use a penetrating natural-stone sealer, not the film-forming products used on concrete pavers. Siesta Key and Palmer Ranch properties typically have travertine pool decks that need pH-neutral cleaning before any sealer is applied, and we handle the full prep-to-seal process.
Every 2–3 years for driveways and every 2 years for pool decks and exposed patios in Sarasota. Gulf humidity, summer UV, and salt air off the Gulf combine to degrade sealer faster here than in most Florida markets. Siesta Key and Longboat Key properties near the water often benefit from annual inspections to catch early failures.
We'll come to your property, assess the surface, and give you a straight quote before any work begins.
Thanks, we'll be in touch shortly. Need it sooner? Call us at (941) 237-8107.
